Wi-Fi setup
Join the router Wi-Fi shown on the label or setup card, then open the local admin page.
Connect
Open your local SpiderVPN router setup
Use SpiderVPN Connect to reach your local router setup page from the device already connected to the router.
Before you start
Local setup happens on your home network
Wired setup
If Wi-Fi is unavailable, connect by Ethernet and open the router local address from the connected device.
Custom gateways
If the router was already customized, use your device gateway address or ask support to confirm the model-specific path.
Local router setup
Connect to your SpiderVPN router first
This page does not scan your network or automatically contact private router addresses. Join the router Wi-Fi or plug in by Ethernet, then open the local admin page yourself.
- 1Connect your phone or computer to the SpiderVPN router Wi-Fi, or use an Ethernet cable.
- 2Open the matching local admin address below in a new tab.
- 3If neither address opens, check the router label or your device gateway address, then contact support with the model name.
Open SpiderVPN or GL.iNet admin
http://192.168.8.1
Common GL.iNet local address after connecting to the router Wi-Fi or Ethernet.
Open OpenWrt admin
http://192.168.1.1
Common OpenWrt and Linksys/OpenWrt local address on a new or reset router.
Try OpenWrt over HTTPS
https://192.168.1.1
Use this if HTTPS was configured on your local router.
If the local page does not open
Use your gateway address
If the default address was changed, open the Gateway or Router IP shown by your phone, tablet, or computer for the current Wi-Fi or Ethernet connection.
Check router mode
Access Point, extender, or WDS mode can make the router use an address assigned by the upstream network instead of the default local address.
Reduce connection conflicts
If the page still will not open, try an incognito browser window and temporarily disable VPN, proxy, or mobile-data fallback while you are connected to the router.